Open the cover and take out the drum unit assembly. NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine. Please follow the steps below to clear the Replace Toner message. Remove the cartridge from the drum unit and recycle it. Add a comment Step 3 Push down on the lever lock to unlock the cartridge from the drum unit. Add a comment Step 2 Gently pull the drum unit out of the printer at a slight incline angle. > For the order number (Order No.) of the toner cartridge, please click here to see the Consumables & Options page. Step 1 Toner Cartridge Pull the center paper tray extender to expose the drum unit. > Click here to see information for the difference between the toner cartridge and the drum unit. Verify you replace only the Toner Cartridge and not the drum unit. The Brother machine has separate consumables the toner cartridge and the drum unit. Stop Mode: The Error LED ( ) will blink once in 1.5 seconds intervals. This procedure is repeated until the error is corrected. When the Replace Toner message appears, the following LED indications is shown on the control panel.Ĭontinue Mode: Both the Ready ( ) and Error ( ) LEDs will turn on together, then the Error LED ( ) will turn off after 0.5 seconds and the Ready LED ( ) will turn off after 1 second, they will then both be off for a further 1 second. The Replace Toner message appears when the toner cartridge needs to be replaced.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |